Gamyklinis užsakymas. Teirautis pristatymo laiko

Installers from the HVAC, electrical and garden sectors can use the RODIADRILL 200 diamond electric drill motor to carry out free-hand and stationary core drilling. The working area is limited from Ø 10 - 250 mm. The 3-speed gearbox with high torques up to max. 71 Nm is specially designed for heavily reinforced concrete. Safety for motor and user thanks to integrated mechanical slipping clutch, electronically controlled overload switch-off and PRCD switch

4 applications with one drill motor
Stationary wet drilling in concrete up to max. Ø 200 mm
Stationary dry drilling in masonry up to max. 225 mm
Freehand wet drilling up to max. Ø 82 mm
Freehand dry drilling up to max. Ø 250 mm
Safety for motor and user thanks to integrated mechanical friction clutch, electronically controlled overload shutdown and PRCD switch
Optimal drilling progress through electronically controlled soft start and LED display
In case of overload cut-off, the motor is immediately ready for use again after the restart
Low operating costs due to maintenance-friendly flushing head

Input power 2700W
Output power2400W
Product weight7.2kg
Voltage 230V
Power cable length3.5M
Number of revolutions600 / 1250 / 3200 rpm
Drilling diameter (to)250MM
Drilling diameter (from)10MM
Torque71 / 34 / 17nm
Frequency50HZ
Threaded adaptor 1.1/4"UNC / G 1/2"

https://rothenberger.com/gb-en