Cordless circular saw CSC SYS 50 EBI-Set

Battery voltage2 x 18 V Idle engine speed4 500 – 6 800 min?¹ Saw blade location hole20.00 mm Inclination angle-10 - +47 ° Cutting height 0°0 - 48 mm Cutting height 45°0 - 34 mm Cutting height -10°21 - 32 mm Mitre angle0 - 70 ° Parallel cut width280.00 mm Tabletop height280.00 mm Dimensions (L x W x H)512 x 396 x 296 mm Dust extraction connection diameter27/36 mm Drive typeBattery Battery capacity5.00 Ah Product weight15.00 kg The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use, as it is tremendously convenient in its size. Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled cuts of -2° to 47°. The unique digital operation produces results with maximum precision, down to accuracies within a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines. Together with the UG-CSC-SYS underframe, you have the perfect worktable immediately on hand, and transport from the vehicle to the point of use thus succeeds effortless. The CSC SYS 50: Precise sawing to go. Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°. Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels. Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe. Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre. Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured. Convenient: Four saw blade positions can be saved and selected via the digital display. Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results. Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70° Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor Healthy working with a system: Ideal also in combination with the Festool cordless extractors Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one Unique: Three-year warranty for battery packs and chargers too