Plaster finishing machine PFM WT with water tank

Working on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions. Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required. The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications. Due to the large operation area of up to Ų 350 mm (trowel even Ų 450 mm), your work can be completed much faster and easier than by hand. The PFM WT was formerly knows as ROKAMAT NAUTILO. Scope of supply: Plaster finishing machine (water injection) Strap Supporting plate (velcro system) Sponge disc diam 350 mm (Item no. 49300) Case

Machining plaster, lime-cement render and clay plaster Abrading render and plaster Gypsum multi finish Machining of fine finish plaster Smoothing concrete elements Sponging filler compounds

Built-in backpack water tank (6 l) Uniform structure due to large operation area Time- and cost-saving (approx. 50 % time saving compared to manual work) Adjustable water injection by lever valve Light weight hand tool Fields of application Plaster finishing: very good Flattening fresh concrete: good Working on scaffolding: very good Working on scaffolding and no water hose at hand? Or you are working on a construction site with either a contaminated or no water source at all? The plaster finishing machine with water tank PFM WT solves all of these problems. The 6 l water tank, which is carried on the back, provides you with water supply even under unfavorable conditions. Water injection is controlled manually via a lever valve on the handle. The water outlet is placed directly at the head of the tool. Thus, the plaster can be continually re-moistened if required. The speed control is located on the side of the backpack and can be individually adjusted to a range between 75-340 min-1 anytime. As a result, there are numerous additional possible applications. Due to the large operation area of up to Ų 350 mm (trowel even Ų 450 mm), your work can be completed much faster and easier than by hand. The PFM WT was formerly knows as ROKAMAT NAUTILO.

Power consumption1 000 W Idle engine speed75-340 rpm Volume water tank6 l Net weight hand tool2,1 kg Net weight backpack5,7 kg Total weight1)9,4 kg Accessory-Ų250/350 mm